#Rcf rdnet control 2 install
#Rcf rdnet control 2 Pc

#Rcf rdnet control 2 Pc

The network and devices configuration can be saved as file in the PC and later reloaded. From PC it is possible to check the operating of each single device connected to the network and edit its parameters output level, mute, equalization, delay, etc.

#Rcf rdnet control 2 install

For the RDNET network operating, it is necessary to install the appropriate Software on PC, on Microsoft Windows® environment. lt is not allowed to modify or change or try to decompile this software. Up to 32 devices can be connected to each subnet (2 subnets x 32 total 64 devices).The addressing of the. RDNET CONTROL 2 is an hardware interface to connect dB Technologies RDNET compatible devices (DVA T12, DVA S30N,etc.), to a Personal Computer (PC) by means of.

: Notes About The Rdnet Software RCF RDNET system only. The RDNET CONTROL 2 unit can manage up to 2 subnets.

Each device is assigned a unique address during the power on procedure of network. Example: the RDNET CONTROL 2 port 1 is connected to the DATA IN input of a TTL55-A loudspeaker, of which DATA LINK parallel output is linked to the input of the following TTL55-A loudspeaker. The addressing of the various devices is handled automatically by RDNet Control 2 interface. Up to 32 devices can be connected to each subnet (2 subnets x 32 = total 64 devices). The interface can be directly connected to the DSP on board of every TT+ line array module through. All the data collected from the slaves are delivered to the sound engineer by USB in a local installation or by Ethernet from remote locations.

The RDNet Control 2 unit can manage up to 2 subnets. The RDNet Control 8 is a real-time monitor and control system able to manage up to 256 devices linked in a bus or up to 128 devices in a ring topology. The RDNet system was purposely developed to create a data network for monitoring and command of more systems. Up to 32 devices can be connected to each subnet (2 subnets x 32 = total 64 devices).The addressing of the various devices is handled automatically by RDNET CONTROL 2 interface.Each device is assigned a unique address during the power on procedure of network.For the RDNET network operating, it is necessary to install the appropriate Software on PC, on Microsoft Windows® environment.From PC it is possible to check the operating of each single device connected to the network and edit its parameters output level, mute, equalisation, delay, etc.The network and devices configuration can be saved as file in the PC and later reloaded.RDNET is a 'œreal-time' system: Information relating to the functioning of the devices is acquired in real-time, a feature that allows a global view of connected devices.For the correct working of USB (1.1 o 2.0) communication between PC and RDNET CONTROL 2 it is recommended to use the USB cable supplied.The RDNet Control 2 is an hardware interface to connect RCF RDNet compatible devices (TTL55-A, TT元3-A II, TT元1-A II, etc.) to a Personal Computer (PC) by means of an USB connection. RD Net Controller for 2 Lines per 32 Speakers RDNET CONTROL 2 is an hardware interface to connect dB Technologies RDNET compatible devices (DVA T12,T8, DVA S30N,etc.), to a Personal Computer (PC) by means of an USB connection.The RDNET system was purposely developed to create a data network for monitoring and command of more systems.The RDNET CONTROL 2 unit can manage up to 2 subnets.

IN-UNF Ultra-Nearfield Studio Monitor System.